Your cart is empty.
The gearbox controller is the vehicle component that is responsible for gear shifting. In the case of an automatic gearbox, the change takes place depending on the speed of the car and the engine speed. The controller works on the basis of many different sensors that provide information, such as wheel speed, engine speed, vehicle speed and many others. Thanks to this, it can change the gear ratio ...
ABS systems are now standard on cars; this system is responsible for correct distribution of the braking force to the individual wheels so that the car does not skid when the brake pedal is pressed. The braking system consists of an ABS pump, a controller and a set of sensors. These measure the speed at which the wheels are turning; if the wheels are moving at an incorrect speed, the controller ...
Engine controller is a very important component of your vehicle because it manages the operation of the combustion engine, determines the parameters of operation based on readings from many sensors located throughout the car. It controls the work of such systems as ASR and ESP, and determines the appropriate mixture burned in the engine chamber, and also supervises fuel injection and the amount ...
The Anti-Lock Braking Systems (ABS) have been a standard feature on cars for years, preventing the brake pads from pressing against the brake drums and causing the car to skid. ABS also enables the car to stop on a shorter distance and allows manoeuvring while braking. The system works based on a number of wheel speed sensors; it checks the brake fluid pressure and reacts accordingly when the ...
For the proper operation of the gearbox, a controller is needed, which, on the basis of data from a number of sensors placed in the vehicle, can adjust e.g. the pressure and temperature of the fluid in the gearbox. The controller also monitors the position of the lever, and is responsible for the correct gear depending of the speed of the car and engine speed. While you are driving, the ...
One of the systems that are essential for the safety of your vehicle is the ABS which prevents the brakes from locking during emergency braking. This allows you to avoid an obstacle or change direction while braking. In addition, ESP systems are also used, and these are responsible for traction control. How does an ABS pump controller work? Brake assist systems, which control traction, work on ...
The gearbox control unit is responsible for the correct performance of the gearbox, the correct setting of the gearshift and the adjustment of the pressure and temperature of the oil in the gearbox. It is worth noting that in order to work properly, the gearbox will need the right oil which should have the right viscosity and temperature. The controller is responsible for the proper selection of ...
An engine controller is an electronic device which collects a lot of information from sensors placed in different parts of the vehicle; then it can regulate e.g. the engine power and the performance of your car. Of course, it is a solution that monitors the operation of the entire car; it can help you save fuel by adjusting the flow rate in such a way as to achieve the desired power. Cars today ...
From 2016, new cars sold in our country must be equipped with ABS, a system that prevents the brakes from completely locking during braking. This allows the driver to have full control over the car during the braking manoeuvre and to change the direction of travel thus avoiding an accident; additionally, the braking distance has been reduced. Components of the ABS system The most important ...
Cars equipped with an automatic transmission also have a gearbox controller which is responsible for supervising the correct operation of the transmission. This is a component that reads data from a number of sensors in the car; it also works directly with the engine controller. Modern gearbox controllers manage the shift lock of the gearbox; they also supervise the work of solenoid valves which ...
