The ABS pump, where ABS stands for Anti-lock Braking System, is a component of the braking system that is found in every newer car, and its main function is to prevent the wheels from locking up during braking and to provide better stability and control of the vehicle. The ABS pump works by controlling the brake pressure in individual pistons located in the brake calipers. This makes it possible to prevent wheel locking and provide better grip during braking. Failure of the ABS pump can manifest itself in a variety of ways, such as a lack of response to pressing the brake pedal, faulty power braking or malfunction of the ABS during braking. If this is the case, it is necessary to visit a garage and have the condition of the ABS pump checked, and possibly have the pump repaired or replaced.

ABS pump controller remanufacturing

ABS pump controller remanufacturing is the process of repairing or replacing damaged ABS pump controller components. It is a commonly used repair method when the controller has been damaged or flooded and it is too costly or impossible to repair or replace with a new controller due to the lack of availability of a new controller. Remanufacturing of an ABS pump controller can only be a reasonable solution if the damage is not too severe and the damaged components can be repaired or replaced effectively. In this case, remanufacturing of the ABS pump controller may be a cheaper solution than purchasing a new controller.

However, it is important to bear in mind that remanufacturing of the ABS pump controller is not a solution for all cases. In cases where the damage is too severe or the controller is too worn, a better solution may be to purchase an original used controller available here: ABS pump controller remanufacturing. In such a case, it may not be cost-effective or even possible to remanufacture the ABS pump controller.