The gearbox control unit is responsible for the correct performance of the gearbox, the correct setting of the gearshift and the adjustment of the pressure and temperature of the oil in the gearbox. It is worth noting that in order to work properly, the gearbox will need the right oil which should have the right viscosity and temperature. The controller is responsible for the proper selection of gears and for adjusting the properties of the oil so as to adequately protect all components of the transmission.

Signs of gearbox controller failure

If the controller fails to work properly, the gears are shifted differently than expected by the manufacturer, and then there may be more wear and tear on the brake discs or the clutch. The controller has many sensors which allow to determine the correct gear ratio; it may be a sensor in the drive shaft, and also a sensor in the brake system. This is quite an important component which will affect the proper operation, proper wearing of various components responsible for the drive of your vehicle. Nowadays, gearbox controllers typically steer the work of a hydraulic gearbox with electronic control. Incorrect operation may also lead to higher fuel consumption, incorrect synchronisation of gear shifting, caused e.g.by wrong reading of the vehicle speed or engine revolutions.

Reconditioned gearbox controllers

If the gearbox controller needs to be replaced, then you can buy a new original controller or a reconditioned one, which will be much cheaper. Certainly, people who own older car models may find it difficult to buy a factory new controller so they look for a reconditioned item that will be fully operational. Repairing a transmission controller may turn out to be prohibitively expensive given the price of the electronics and the software services. Many different models of gearbox controllers can be purchased on the website where to buy a gearbox controller. Obviously, you need to choose the right model for your vehicle.